ENGLISH
Chapter 4: Using the DVR
64
DVR User’s Manual
Menu Item
Descripon
Device ID Enter desired ID for the DVR. The device ID, used to idenfy the DVR, can only be
composed of numbers and cannot be the same with other IDs when mulple DVRs are
connected in the same network.
Device Type Displays the model type of the DVR.
MAC Address Displays the MAC address of the DVR. When mulple DVRs are connected to the same
network, each DVR must have a unique MAC address to ensure that the DVR can
connect to the network.
Firmware
Version
Displays the current rmware version of the DVR. To update the rmware version, see
page “Update System Firmware” on page 65.
IE Version Displays the current soware version of the web client interface.
3 Modify the Device Name and Device ID, if necessary.
4 Click Apply to save the sengs.
5 When data saving is complete, click OK.
4.5.6 Maintenance Sengs
The MAINTENANCE menu allows you to set automac system maintenance, reset the DVR to its factory default, and
update the rmware sengs, or reboot and power o the DVR manually.
Manual Reboot and Power O
To reboot or power o the DVR instantly, do the following:
1 In preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Main Menu > SYSTEM > MAINTAIN.
3 Do one of the following:
• Click Power O to turn o the DVR.
• Click Reboot to reboot the DVR.
4 A message appears, click OK to conrm the operaon.
Note:
When turning o the DVR, wait for the message “Now you can power o!” to appear on the screen, then unplug
the power cord from the power outlet.
Comments to this Manuals